FOSROC Construction Chemicals Fosroc India Fosroc GP2 Fosroc Auramix 350 Fosroc Nitobond ep Fosroc Chemicals
  • Home
  • Products
    • Fosroc Product Summary Guide
    • Brushbond RFX
    • Nitobond EP
    • Nitoflor Hardtop
    • Conbextra GP2
  • Contact
  • Privacy Policy


Fosroc commenced its Indian operations in 1981 and established a 100% subsidiary in 1999.
Fosroc has four state-of-the-art manufacturing facilities, one in Bengaluru, Karnataka;
second in Ankleshwar, Gujarat; third in Rudrapur, Uttaranchal and fourth in Kolkata, West Bengal.

Fosroc Chemicals (India) Pvt. Ltd. works closely with its customers, including distribution sector, through its well-equipped technical service department, a network of sales engineers, customer service professionals, etc. Fosroc India prides itself for the level of technical and customer support that it gives to its valued customers. 

​
International leverage gives Fosroc the opportunity to offer tried and tested solutions from one geographical region to another with great confidence.
Fosroc Chemicals (India) Pvt. Ltd. provides time-tested solutions that include services such as:
ƒ Diagnosis and Specification Support ƒ
     
Application Support
ƒ Distribution Support
ƒ After-Sales Service

Fosroc Chemicals (India) Pvt. Ltd. remains focused on the industrial and construction segments with a wide range of quality products.

    Admixtures and Surface Treatments ƒ
   
Grouts and Anchors
ƒ Industrial Flooring
ƒ Concrete Repair
ƒ Protective Coatings
ƒ Joint Sealants and Adhesives ƒ
     
Waterproofing
ƒ Cement Additives 

Admixtures
Chemical admixtures are used to modify and improve the properties of fresh and hardened concrete or mortar. 

​Product
Description
Typical Uses
Dosage/Coverage/Yield
Product
Description
Typical Uses
Dosage/Coverage/Yield

Water Reducing Admixtures (Plasticisers)
Conplast SP 430G8
200 litres and 250 kg
Conpalst SP 430 KRM6
5, 20 and 200 litre bulk supply.
Conplast SP430 ITPQ
200 kg & bulk supply.
Conplast SP 500KL
200, 250 kg & bulk supply
Conpalst SP550
250 Kg drums & bulk supply.
Conplast SP 600
200, 250 kg & bulk supply
High performance superplasticising admixture. Conplast SP430 G8 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 G8 conforms to ASTM-C-494 Type ‘G’.
Conplast SP430KR(M)6 has been specially formulated to give high water reductions upto 25% without loss of workability or to produce high quality concrete of reduced permeability.
Superplasticising admixture for PQC concrete. Conplast SP430ITPQ complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP430 conforms to ASTM-C-494 Type ‘G’ depending on the dosage used.
High performance water reducing and superplasticising admixture. Conplast SP500 KL complies with IS:9103:1999 (2007) and conforms to ASTM-C-494 Type ‘G’.
Conplast SP550 has been specially formulated to give higher water reductions without loss of workability or to produce high quality concrete of reduced permeability.
High range water reducing, superplasticising and slump retaining admixture. Conplast SP600 complies with IS:9103:1999 and BS:5075 Part 3. Conplast SP600 conforms to ASTM-C-494 Type ‘D’ and Type ‘G’ depending on the dosages used.
To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength.
• To produce pumpable concrete
• To produce high strength, high grade concrete M30 & above by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.
Best Suitable for PQC concrete by substantial reduction in water resulting in low permeability and high early strength.
To produce pumpable concrete to obtain high strength by substantial reduction in water resulting in low permeability and high early strength.
• To produce pumpable concrete
• To produce high strength, high grade concrete by substantial reduction in water resulting in low permeability and high early strength.
• To produce high workability concrete requiring little or no vibration during placing.
To produce pumpable concrete for low water cement ratio by substantial reduction in water resulting in low permeability and high early strength.
0.5 - 1.5 litres /100 kg of total cementitious material
0.5 - 1.5 litres /100 kg of total cementitious material
0.5 - 1.5 litres/100kg of total cementitious material
0.5 - 1.3 litres /100 kg of total cementitious material
0.5 - 1.5 litres /100 kg of total cementitious material
0.5 - 1.3 litres /100 kg of total cementitious material
Conplast P211
1, 5, 20 and 200 litres
Conplast P505
5, 20 and 200 litres
Water reducing admixtures. Conforms to IS:9103-99 & Complies with ASTMC494 as Type A & IS:2465.
High performance slump retaining and water reducing admixtures. Complies with BS 5075 part 1 and ASTMC494 as Type B and D & IS:9103-99.
All structural and general concrete where improved density and quality are required. Cement saving where excess cement proves necessary to obtain target strength.
Cement saving can be made without reduction in strength and workability. Used for all structural concrete where improved density and quality are required.
0.2 to 0.5 liter / 100kg
of total cementitious material

0.4 to 1.0 liter / 100kg
of total cementitious material

Retarding Plasticisers
Conplast RP264 Retarding and water reducinng
Avoidance of cold joints where delays in transport and placing of concrete occur-towers, chimneys, hi-rise buildings, using slipform shutters, tunnels/ shaft lining, offshore construction and piles.
0.2 to 0.6 liter / 100kg
of total cementitious material

5, 20 and 200 litres
admixture. Conforms to IS9103-99. Also complies with ASTM C494 Type B and Type D.

Conplast R
20, 200 litre & bulk supply.
Retarding water reducing admixture. Conplast R complies with BS 5075 Part 1 and with ASTM C494 as Type B and Type D.
To extend the working life of semi-dry concrete screeds. Particularly suitable for use in mixes having fly ash and also improve the working life of semi dry concrete mixes, specifically RCC (Roller Compacted Concrete) type of mixes.
0.25 to 0.6 liter per 100 kg of total cementitious material

Conplast SR Surface retarder for Surface retarder for producing exposed 8-12m2/ litres
5,20 and 200 litres
concrete. aggregate concrete finish in face-down precast concete manufacture.
High Range Water Reducing Admixtures (Superplasticiers) - SNF Based
Conplast SP337
5, 20 and 200 litres. Also in 250 kg
Conplast SP 430
5, 20, 200 litres. Also in 200 & 250 Kg
Conplast SP 430ES2
200 liters 250 kg & bulk supply
Conplast SP 430SRV
200 litres & 250 kg
High performing water reducing superplasticisers. Conforms to IS:9103-1999 also complies with IS:2645-2003, BS5075 part 3 and ASTM C-494 Type F.
High range superplasticising admixture. Complies with IS:9103:1999 and BS 5075 Part 3, it also conforms to ASTM C-494 Type F and Type G depending on the dosage used.
High performance superplasticising admixture. Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3 and with ASTM C494 Type ‘G’ admixture depending on dosage used.
Slump retention admixture for structural concrete Conplast SP430SRV complies with the requirement of ASTM C 494-80 as a Type G & IS:9103-1999.
To produce pumpable concrete for low water cement ratio concrete. Easy compaction
in heavily reinforced concrete bridges, foundations coloumns, beams and narrow formwork units.

Speeds up construction, increases workability and cohesion, aids pumping by reducing line friction and dry packing, low porosity resulting in sustainability improved water penetrartion resistance.
To provide increased ultimate strength gain by significantly reducing water demand in a concrete mix. To provide improved durability by increasing ultimate strength and reducing concrete permeability.
Conplast SP430SRV is used where a high degree of workability is required and also as an aid to workability retention where delays in transportation or placing are likely or when high ambient temperatures cause rapid slump loss.
0.5 to 1.5 liter per 100 kg ce of total cementitious material
0.5 to 1.5 liter per 100 kg of total cementitious material
0.6 - 1.5 litres per 100 kg of total cementitious material
0.35 to 0.90 litres / 100
kg - for normal mixes &
0.5 to 1 litre/100 kg for high cement content mixes.

Air Entraining Agents
Conplast PA21(S) Water reducing & air entraining 200 litres admixtures, conforms to
IS:9103-1999 (2007).
Concrete water retaining structures-dams, canal linings and reservoirs and costal structures.
0.2 - 0.4 litres/100 kg of total cementitious material

Conplast AEA
20 and 200 litres & bulk supply.
Air entraining admixture. Conplast AEA complies with BS 5075 Part 2, BS 4887 Part 1, ASTM C260.
To produce air entrained concrete for increased durability and resistance to damage by frost and deicing salts. Typical applications include concrete roads and concrete dams, airport runways and taxiways and other extensive areas of concrete exposed to potential frost damage.
0.08 litres /100 kg of total cementitious material

We are known in many different countries for being the supplier of high standard specialist solutions. We work with a wide range of industries and clients throughout the world. If you want to see how our solutions can help you, get in touch with our advisers. Explore the website to discover who we are and the solutions we provide.

Contact Us

  • Home
  • Products
    • Fosroc Product Summary Guide
    • Brushbond RFX
    • Nitobond EP
    • Nitoflor Hardtop
    • Conbextra GP2
  • Contact
  • Privacy Policy