Fosroc Conplast SR: Water-Based Surface Retarder for Exposed Aggregate Concrete Finishes
Fosroc Conplast SR is a water-based surface retarder that is perfect for producing exposed aggregate concrete finishes in freshly poured face-up and face-down precast concrete panels or slabs. This product is manufactured by Fosroc Chemicals India Private Limited and is marketed and supplied in India by their authorized distributor, Space Arc Engineering, for the entire range of Fosroc products. Here are some of the main uses and advantages of using Fosroc Conplast SR:
Main Uses:
Fosroc offers technical support with the backing of a team of experts in the industry.Application Instructions:
Depending on the rate of application, the depth of exposure can be 4 to 10mm on the concrete surface.
Cleaning:
All tools and equipment should be cleaned with water immediately after use.
Estimating:
Packaging: Conplast SR surface retarder is supplied in 5, 20 and 200 liter containers.
Coverage: 8-12 m2/liter
Storage: Conplast SR has a shelf life of 12 months under normal warehouse storage conditions. It should be protected from frost and if it becomes frozen, it should be completely thawed and then thoroughly mixed before use.
Precautions:
Fosroc Conplast SR is generally non-toxic, but ingestion in large amounts should be avoided. In case of skin or eye contact, wash the affected area with water. If eye contact is severe or significant ingestion occurs, medical advice should be sought immediately. The product is non-flammable.
Additional Information:
The Fosroc range of associated products includes high strength cementitious and epoxy grouts, admixtures, curing compounds, release agents, flooring systems, repair mortars, protective coatings, sealants and waterproofing. There are individual data sheets available for these products.
Main Uses:
- Produces an exposed aggregate concrete finish
- Suitable for face-up and face-down precast concrete manufacture
- Can be used on steel, glass fiber or timber formwork
- Economical in application
- Simply applied, straight from the container
- No need to use a mold release agent
- Good results with heat curing and high temperature concreting
- Non-toxic and non-flammable
Fosroc offers technical support with the backing of a team of experts in the industry.Application Instructions:
- Timber formwork should be sealed with Reebol Formcote to avoid absorption of Conplast SR
- Formworks and molds must be clean and dry before application
- To apply Conplast SR, a single, uniform coat should be used, and it can be applied with a spray, brush, or roller.
- Coverage rate is 8-12 m2/liter
Depending on the rate of application, the depth of exposure can be 4 to 10mm on the concrete surface.
Cleaning:
All tools and equipment should be cleaned with water immediately after use.
Estimating:
Packaging: Conplast SR surface retarder is supplied in 5, 20 and 200 liter containers.
Coverage: 8-12 m2/liter
Storage: Conplast SR has a shelf life of 12 months under normal warehouse storage conditions. It should be protected from frost and if it becomes frozen, it should be completely thawed and then thoroughly mixed before use.
Precautions:
Fosroc Conplast SR is generally non-toxic, but ingestion in large amounts should be avoided. In case of skin or eye contact, wash the affected area with water. If eye contact is severe or significant ingestion occurs, medical advice should be sought immediately. The product is non-flammable.
Additional Information:
The Fosroc range of associated products includes high strength cementitious and epoxy grouts, admixtures, curing compounds, release agents, flooring systems, repair mortars, protective coatings, sealants and waterproofing. There are individual data sheets available for these products.