Fosroc Auramix 500: High-Performance Admixture for Ultra-High Strength Concrete
Fosroc Auramix 500 is a high-performance superplasticizer designed for use in concrete that needs lengthy workability retention and has a very low water cement ratio. It is appropriate for self-compacting concrete, concrete that has been pumped to larger heights, concrete that is ultra-highly durable, concrete that is high-performing, and concrete that is used in thin structural sections.
Auramix 500, which is manufactured by Fosroc Chemicals India Private Limited, is sold and distributed in India by Space Arc Engineering, who is also the company's official distributor for the entire Fosroc line of products.
Fosroc Auramix 500's advantages include:
IS: 9103-1999 is followed by Auramix 500. (2007). Also, depending on the dosage, it complies with ASMT C494 Types F and G.
Description :
The innovative superplasticizers of the most recent generation , Auramix 500 is based on a polycarboxylic ether polymer with long lateral chains. Our solution promotes electrostatic dispersion when combined with concrete, which helps cement particles split and disperse more successfully . The water need for flowable concrete is significantly reduced by this process. The combination of water reduction and workability retention features in Auramix 500 enables the creation of high - performance concrete and/or concrete with a high degree of workability .
It's vital to carry out tests using the materials and circumstances that will be present during use in order to establish the optimal dosage of Auramix 500 for particular applications. The typical dosage range is 0.3 to 2.0 kilogramme per 100 kg of cementitious material. To achieve specific mix needs, doses outside of this range can be employed. Please get in touch with Fosroc for advice in these circumstances.
Auramix 500 overdose may result in segregation and a delayed setup time . The product is offered in bulk tankers, 200- and 250 - kg drums. For storage, it is suggested to maintain a temperature between 20 and 50 degrees Celsius to preserve the product's 12 - month minimum shelf life. For guidance if the product's temperature is outside of this range, please get in touch with your nearby Fosroc office .
Precautions:
Current standards do not classify Auramix 500 as dangerous. To be safe, though, avoid swallowing and avoiding skin and eye contact. Put on the proper gloves and eye protection. If the product gets on the skin, it needs to be removed right away with water. Rinse with lots of water and get medical attention if it gets in your eyes. Do not induce vomiting if accidently consumed; instead, seek immediate medical attention. Technical Assistance
For on-site support and direction with mix design, admixture selection, trial assessments, and dispensing equipment, Fosroc provides technical consultancy services.
In conclusion, Fosroc Auramix 500 is a high-performance additive for concrete with extremely high strengths. It is a low viscosity additive that can be used to pump various concrete grades to higher floors and has increased adherence to steel used for prestressing and reinforcing.
Auramix 500, which is manufactured by Fosroc Chemicals India Private Limited, is sold and distributed in India by Space Arc Engineering, who is also the company's official distributor for the entire Fosroc line of products.
Fosroc Auramix 500's advantages include:
- For delivering varied concrete grades to raised floors, low viscosity and high pumpability make it excellent.
- E modulus is higher
- better adherence to steel used for prestressing and strengthening
- increased carbonation resistance
- compatible with all types of cement, but not with high-alumina cement.
- can be used with cement alternatives including fly ash, ggbs, and microsilica
- decreased creep and shrinking
- heightened toughness
- VMA built-in (Viscosity Modifying Agent)
- compliance with standards
IS: 9103-1999 is followed by Auramix 500. (2007). Also, depending on the dosage, it complies with ASMT C494 Types F and G.
Description :
The innovative superplasticizers of the most recent generation , Auramix 500 is based on a polycarboxylic ether polymer with long lateral chains. Our solution promotes electrostatic dispersion when combined with concrete, which helps cement particles split and disperse more successfully . The water need for flowable concrete is significantly reduced by this process. The combination of water reduction and workability retention features in Auramix 500 enables the creation of high - performance concrete and/or concrete with a high degree of workability .
It's vital to carry out tests using the materials and circumstances that will be present during use in order to establish the optimal dosage of Auramix 500 for particular applications. The typical dosage range is 0.3 to 2.0 kilogramme per 100 kg of cementitious material. To achieve specific mix needs, doses outside of this range can be employed. Please get in touch with Fosroc for advice in these circumstances.
Auramix 500 overdose may result in segregation and a delayed setup time . The product is offered in bulk tankers, 200- and 250 - kg drums. For storage, it is suggested to maintain a temperature between 20 and 50 degrees Celsius to preserve the product's 12 - month minimum shelf life. For guidance if the product's temperature is outside of this range, please get in touch with your nearby Fosroc office .
Precautions:
Current standards do not classify Auramix 500 as dangerous. To be safe, though, avoid swallowing and avoiding skin and eye contact. Put on the proper gloves and eye protection. If the product gets on the skin, it needs to be removed right away with water. Rinse with lots of water and get medical attention if it gets in your eyes. Do not induce vomiting if accidently consumed; instead, seek immediate medical attention. Technical Assistance
For on-site support and direction with mix design, admixture selection, trial assessments, and dispensing equipment, Fosroc provides technical consultancy services.
In conclusion, Fosroc Auramix 500 is a high-performance additive for concrete with extremely high strengths. It is a low viscosity additive that can be used to pump various concrete grades to higher floors and has increased adherence to steel used for prestressing and reinforcing.