Conplast SP430 ES2: High-Performance Superplasticising Admixture for Water-Reduced, High-Strength Concrete
Conplast SP430 ES2 is a high-performance superplasticising admixture that can significantly reduce the water demand of concrete mixes, enabling major increases in strength. This product is supplied by Fosroc's authorised distributor Space Arc Engineering. The admixture is chloride-free and safe for use in prestressed and reinforced concrete. It improves cohesion, particle dispersion, minimises segregation and bleeding, and enhances pumpability. Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3 and with ASTM C494 Type 'F' and G admixture depending on the dosage used.
Fosroc's technical advisory service can provide on-site assistance and advice on mix design, admixture selection, evaluation trials, and dispensing equipment. The optimum dosage of Conplast SP430 ES2 should be determined by trial mixes using the materials and conditions that will be experienced in use. To achieve water-reduced, high-strength concrete, a typical dosage range is between 0.6 to 1.5 liters per 100 kilograms of cementitious materials, which includes PFA, GGBFS, and microsilica.
Conplast SP430 ES2 can be used alongside other Fosroc admixtures in the same concrete mixture.To ensure optimal results, it's important to add admixtures individually to concrete and avoid mixing them beforehand. Conplast SP430 ES2 is versatile and can be used with various types of Portland cements and cement replacements, including PFA, GGBFS, and microsilica. To ensure accurate measurements, it's recommended to use a dispenser when measuring the appropriate amount of Conplast SP430 ES2. An overdose of double the amount of Conplast SP430 ES2 may result in an increase in retardation. The admixture is available in 200-liter, 250 kg drum, or bulk supply. It is recommended to store the product in a dry and cool place, shielded from direct sunlight.
Storage Conplast SP430 ES2 should be stored in dry conditions in its original sealed container. The shelf life of the product is 12 months from the date of manufacture when stored as recommended.
Supplied and Distributed by Authorized Distributor Space Arc Engineering Fosroc Conplast P211 is a high-performance superplasticising admixture that is ideal for increasing ultimate strength gain in concrete mixes. It is supplied and distributed by Space Arc Engineering, an authorized distributor of Fosroc products.
Uses of Conplast SP430 ES2 Conplast SP430 ES2 is designed to disperse fine particles in concrete mixes, which allows the water content of the concrete to perform more effectively. This results in major reductions in water-cement ratio, allowing the production of high-strength concrete without excessive cement contents. It also provides increased workability levels for longer periods than ordinary sulphonated melamine and napthalene admixtures. The improved cohesion and particle dispersion minimize segregation and bleeding and improve pumpability. Additionally, Conplast SP430 ES2 is chloride-free, making it safe for use in prestressed and reinforced concrete.
Benefits of using Conplast SP430 ES2 include its ability to enhance the ultimate strength of concrete by reducing the water required in the mix, making it an excellent choice for high-performance superplasticizing admixtures. It also significantly improves the workability and retention of site-mixed concrete without increasing water demand. Moreover, it provides improved durability by increasing ultimate strength and reducing concrete permeability.
Standards Compliance Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3, and with ASTM C494 Type ‘F’ and G admixture, depending on the dosage used.
Fosroc offers a technical support service that provides on-site assistance and advice on mix design, admixture selection, dispensing equipment, and evaluation trials.
Typical Dosage The normal dosage range of Conplast SP430 ES2 for high-strength , water - reduced concrete is from 0.6 - 1.5 liters/100 kg of cementitious material, including PFA , GGBFS , and microsilica. However, dosages outside the typical ranges quoted above can be used to meet particular requirements. It is recommended to contact Fosroc for advice.
Conplast SP430 ES2 is compatible with other Fosroc admixtures in the same concrete mix . To ensure optimal results, all admixtures should be added separately and not mixed prior to addition. When using multiple admixtures, the concrete's properties should be evaluated by trial mixes. This high-performance superplasticising admixture is suitable for use with all types of ordinary Portland cements and cement replacement materials like PFA, GGBFS, and microsilica .
Instructions for Use The correct quantity of Conplast SP430 ES2 should be measured by means of a recommended dispenser. For optimal results, the admixture should be added to the concrete along with the mixing water. It is important to avoid overdosing the product, as a double dose of Conplast SP430 ES2 can lead to increased retardation compared to the normal dosage. Provided that adequate curing is maintained, the ultimate strength of the concrete will not be impaired by increased retardation and will generally be increased.
To estimate and package Conplast SP430 ES2, you can choose between a 200-liter drum that weighs 250 kg or opt for bulk supply. The optimum dosage of Conplast SP430 ES2 to meet specific requirements should always be determined by trial mixes using the materials and conditions that will be experienced in use.
Fosroc's technical advisory service can provide on-site assistance and advice on mix design, admixture selection, evaluation trials, and dispensing equipment. The optimum dosage of Conplast SP430 ES2 should be determined by trial mixes using the materials and conditions that will be experienced in use. To achieve water-reduced, high-strength concrete, a typical dosage range is between 0.6 to 1.5 liters per 100 kilograms of cementitious materials, which includes PFA, GGBFS, and microsilica.
Conplast SP430 ES2 can be used alongside other Fosroc admixtures in the same concrete mixture.To ensure optimal results, it's important to add admixtures individually to concrete and avoid mixing them beforehand. Conplast SP430 ES2 is versatile and can be used with various types of Portland cements and cement replacements, including PFA, GGBFS, and microsilica. To ensure accurate measurements, it's recommended to use a dispenser when measuring the appropriate amount of Conplast SP430 ES2. An overdose of double the amount of Conplast SP430 ES2 may result in an increase in retardation. The admixture is available in 200-liter, 250 kg drum, or bulk supply. It is recommended to store the product in a dry and cool place, shielded from direct sunlight.
Storage Conplast SP430 ES2 should be stored in dry conditions in its original sealed container. The shelf life of the product is 12 months from the date of manufacture when stored as recommended.
Supplied and Distributed by Authorized Distributor Space Arc Engineering Fosroc Conplast P211 is a high-performance superplasticising admixture that is ideal for increasing ultimate strength gain in concrete mixes. It is supplied and distributed by Space Arc Engineering, an authorized distributor of Fosroc products.
Uses of Conplast SP430 ES2 Conplast SP430 ES2 is designed to disperse fine particles in concrete mixes, which allows the water content of the concrete to perform more effectively. This results in major reductions in water-cement ratio, allowing the production of high-strength concrete without excessive cement contents. It also provides increased workability levels for longer periods than ordinary sulphonated melamine and napthalene admixtures. The improved cohesion and particle dispersion minimize segregation and bleeding and improve pumpability. Additionally, Conplast SP430 ES2 is chloride-free, making it safe for use in prestressed and reinforced concrete.
Benefits of using Conplast SP430 ES2 include its ability to enhance the ultimate strength of concrete by reducing the water required in the mix, making it an excellent choice for high-performance superplasticizing admixtures. It also significantly improves the workability and retention of site-mixed concrete without increasing water demand. Moreover, it provides improved durability by increasing ultimate strength and reducing concrete permeability.
Standards Compliance Conplast SP430 ES2 complies with IS9103:1999, BS 5075 Part 3, and with ASTM C494 Type ‘F’ and G admixture, depending on the dosage used.
Fosroc offers a technical support service that provides on-site assistance and advice on mix design, admixture selection, dispensing equipment, and evaluation trials.
Typical Dosage The normal dosage range of Conplast SP430 ES2 for high-strength , water - reduced concrete is from 0.6 - 1.5 liters/100 kg of cementitious material, including PFA , GGBFS , and microsilica. However, dosages outside the typical ranges quoted above can be used to meet particular requirements. It is recommended to contact Fosroc for advice.
Conplast SP430 ES2 is compatible with other Fosroc admixtures in the same concrete mix . To ensure optimal results, all admixtures should be added separately and not mixed prior to addition. When using multiple admixtures, the concrete's properties should be evaluated by trial mixes. This high-performance superplasticising admixture is suitable for use with all types of ordinary Portland cements and cement replacement materials like PFA, GGBFS, and microsilica .
Instructions for Use The correct quantity of Conplast SP430 ES2 should be measured by means of a recommended dispenser. For optimal results, the admixture should be added to the concrete along with the mixing water. It is important to avoid overdosing the product, as a double dose of Conplast SP430 ES2 can lead to increased retardation compared to the normal dosage. Provided that adequate curing is maintained, the ultimate strength of the concrete will not be impaired by increased retardation and will generally be increased.
To estimate and package Conplast SP430 ES2, you can choose between a 200-liter drum that weighs 250 kg or opt for bulk supply. The optimum dosage of Conplast SP430 ES2 to meet specific requirements should always be determined by trial mixes using the materials and conditions that will be experienced in use.