Fosroc Auramix 300: Key Uses, Advantages, and Features
As the official distributor for the whole Fosroc Range of Products in India, Space Arc Engineering sells and markets Fosroc Auramix 300 on behalf of Fosroc Chemicals India Private Limited. This superplasticizer is an amalgam of superplasticizers of the most recent generation, based on a polycarboxylic ether polymer with long lateral chains that significantly enhances cement dispersion. The Fosroc's main applications and benefits are shown below.
Important Applications:
Advantages:
Fosroc Auramix 300 also has the following features:
Dosage:
Important Applications:
- mass raft construction
- compressed concrete
- Long workability retention required for concrete
- excellent concrete
Advantages:
- By effectively managing the heat generated during hydration, the rate of retardation can produce concrete with a stronger final strength.
- With the built-in VMA, avoid bleeding and segregation.
- a greater E modulus
- improved adherence to steel reinforcing and prestressing
- more improved carbonation resistance
- diminished permeability
- enhanced tolerance to hostile climatic conditions
- shrinkage and creep reduction
- improved toughness
Fosroc Auramix 300 also has the following features:
- Depending on the dosage used, compliance with IS 9103-1999(2007) and ASTM C 494 Types F and G.
- An innovative blend of the newest superplasticizers, based on a polycarboxylic ether polymer with long lateral chains, significantly enhances cement dispersion.
- a powerful superplasticizer that enables the creation of concrete with uniform characteristics at the needed dosage
- An on - site assistance and advice service for mix design, admixture selection, assessment trials , and dispensing equipment is provided by Fosroc .
- This substance is available in bulk tankers, 200 kg and 250 kg drums, and other packaging.
- Should not be eaten or allowed to come in touch with skin or eyes, and appropriate protective gloves and goggles should be worn. Minimum shelf life of 12 months if temperature is maintained between 20C and 500C.
- Splashes should be cleaned up with water, and if they get in your eyes, flush them out right away with lots of water and get help from a doctor. Don't induce vomiting if something has been swallowed; seek medical help right away.
Dosage:
- Always conduct tests with the materials and environmental circumstances that will be encountered in use to identify the ideal Auramix 300 dosage to fulfil specific requirements.
- 100 kg of cementitious material should get between 0.5 and 1.5 ltrs of regular dosage.
- To address certain mix needs, dosage outside the typical range may be utilised; in these circumstances, consult Fosroc for guidance.
- The setting of time and segregation may be delayed due to overdosing.